[Home]

Back to Shoji acrylic plate

Installation of acrylic plate

To cut: Use a thin kerf plywood/paneling saw blade.

	The plate needs to be a little smaller than the slot when used vertically.
	For horizontal use, make some room on the ledge.
	When screws are used, make the hole larger than the screw's diameter.

Avoid attaching to fine frames/kumikos, may warp the wood.

Caution: Acrylic plate expand and shrink about 0.08% every 20 degree F. Plate may start warping when its temperature gets higher than 158 F.

Top

Contact info
Kona Shoji Design
73-1035 Ahulani Street, Kailua Kona, Hawaii 96740 U.S.A.
Phone/Fax: 808-325-0243 or Email

Links

Last updated: 04/22/05