|
Back to
Shoji film for glass
Installation of shoji
film for glass
| 1. |
 |
Do not flatten
the roll too much. The original shape of the roll helps to keep
adhesive even between the film and the backing. |
2. |
 |
Cut
out the film to desired dimensions. |
| 3. |
 |
Clean
the glass surface. Remove any debris. |
4. |
 |
Spray
a thin mild soap and water mixture on the glass. |
| 4. |
 |
Peel
the backing off and place the film on the glass. |
6. |
 |
Squeeze
all the air and water out using a flat edge. |
- Do
not use on acrylic or polycarbonate board such as
plexi-glass. Air bubbles may occur in between.
- Avoid use under
high (95ƒF) or low (40ƒF) temperatures.
- When covering the entire
window, leave 2-3mm (1/16") spaces around the edges making a room for
expansion.
- Must use on a smooth surface.
- Not
for outdoor use.
- Avoid use on wire re-enforce
glass windows.
Top
|
[Home]
